Toshiba Strata DK 280 Installation Manual page 271

1. From Window's Program Manager, double-click
the Accessories Group.
II
I
Toshiba
Manager
2. The Accessories Group window opens. Double-
click the Terminal icon.
3. The Terminal screen appears. From the Settings
pull-down menu, select Communications...
Terminal &ferences...
4. The Communications dialog box appears. Under
Connector, select a COM port (e.g., COMl,
COM2). Click OK.
rarity -
@ None
0 Odd
0 Even
0 Mark
0 Space
Connector
0 Parity Check
0 CaLrier Detect
5. From the Phone pull-down menu, select Hangup.
6. If after a few moments ATH followed by OK
appears, the selected COM port is either the RPCI
or a modem. At the cursor prompt type: ATC0. If
the RPCI-DI is connected to the selected COM
port, the RPCI-DI returns a continuous stream of
data. To stop the continuous data, reset the
telephone by unplugging the DKT modular
connection to the Strata telephone system.
January 1996
6-71