Toshiba Strata DK 280 Installation Manual page 421

Initialization Program 92 -
Initializing Speed Dial Numbers, VM ID Codes,
Character Message Memory, Timed Reminders,
Digital Telephone Volume, Called ID, ANI, and Call
Forward Backup RAM
Clear more data
I
1
programming
mode.
buttons as shown below.
programming
mode.
Clears Station Speed Dial, Voice Mail ID Codes,
and LCD memos assigned to Station Speed Dial numbers.
.5
Clears System Speed Dial and LCD memos assigned to
System Speed Dial numbers.
Clears Character Message Memory (Station and System)
and User Name/Number Display.
Clears Timed Reminders.
Resets digital telephone volume levels to initialized settings, specifically, speaker
volume levels for Internal Call (Intercom or [DN]), ToneBGM, busy override (muted
ring), and ringing volume to approximately mid-range on all DKTs.l
* Clears Call Forward and Message Waiting (R3)
Memory (all stations).
Notes:
1. Program 92-5 does not affect digital telephone handset receiver volume levels. Use
Program 27 to set off-hook handset receiver volume levels for digital telephones.
2. Program 92-9 does not affect Call Forward External or Fixed Call Forward settings.
IMPORTANT !
It is mandatory to complete all parts of Program 92 at every new system install. If
Program 92 is not completed, certain feature operations may cause erratic system
behavior. If Program 91-9 was completed, it is no longer necessary to run Program 92
after running Program 9 l-9.
General Notes:
l
Running Program 91-9 will run all of Program 92 (1 w 9) options.
l
Use the instructions in Table 8-6 in Chapter 8 to clear this data.
l
Power OFF and ON is required to clear telephone LCD Call Forward Displays and
Call Forward button LEDs. Call Forward memory is cleared when Program 92-9 is
run, even if system power is not cycled.
CAUTION!
Running this program will ERASE customer data. .
DK0084
January 1996
10-5