Toshiba Strata DK 280 Installation Manual page 603

Program 50-4 -
LCR Long Distance Information (LDI) Plan Number
SELECT = 4 -J L DATA = LDI Route Plan (01 - 16)'
Identify the LDI Route Plan
by entering 01 - 16.
Note:
1. RCTUA and-B provide 8 LCR Route Plans, RCTU C/D provides 16.
General Notes:
l
For more information, see the instructions preceding the record sheets.
l
Initialized data assigns LDI Plan Number 16 for RCTU C/D, or Number 8 for RCTUA and B.
l
Typically, LDI Plan Number = Local Call Plan Number.
Program 50-5
- LCR Local Call Plan Number
c
I
SELECT = sJ L DATA = Local Route Plan (01 - 16)'
Identify the Local Route Plan
by entering 01 - 16.
Notes:
1. RCTUA and B provide 8 LCR Route Plans, RCTU C/D provide 16.
General Notes:
l
For more information, see the instructions preceding the record sheets.
l
Initialized data assigns Plan 16 to be the local call plan for RCTU C/D, or Plan 8 for RCTUA and B.
'
l
The local plan handles special codes and operator calls.
Program 50-6
- LCR Dial Zero Time-out
SELECT = 6 -1 I- DATA = Time-out Value
Enter a time-out value from
04 - 10 seconds long.
General Notes:
l
For more information, see the instructions preceding the record sheets.
.
l
Initialized data assigns an LCR Dial Zero Time-out value of 06.
l
This value determines pause time before sending a call on to an operator, etc.
DK0432
January 1996 1 O-l 89