Smdr Printout Examples For Dk280 Release 1 And 2 - Toshiba Strata DK 280 Installation Manual

0 7 / 0 6 / 9 0 <DD/MM/YY, EVERY FIFTY CALL RECORDS AND AT MIDNIGHT>
001 205 08:14 00:00;22 123456987 456789
001
MODM 08:15 00:00;18 0O;OO <DlSACALLTOIMDU>
003 200 08:16 00:00;28 00;08 202
0 0 3
DI SA
0 8 :
16 0 0
: 0 0 ; 15 <OUTGOING DISA ACCESS BY INCOMING DISA 012
0 0 1 DISA
0 8 : 17 0 0 : 0 0 2 5 <INCOMING DISA AND ACCESS CO 03 OUTGOING> ;
003
MSS
08:18 00:00;12 00;06 205 <205ANSWERSDlSACALL12SECONDSA,=TERDKDIALTONE>
003 205 08:19 00:00;22 - 202
003*4202 08:19 00:00;16
First Digit (varies)
Last (always this column)
004 200 08:20 00:00;34 1234567891234567896541236;
002 200 08:22 00:00;22
7 14 5 8 3 First Digit (varies)
Last
3 7 0 0
Digit
7145833700 12345678945632i
Account Code
- Outgoing Telephone Number (1-26 digits)
Station to which the CO Line was transferred (1-4 digits)
CO Line incoming Ring Duration Before Answer (MM:SS)
Call Duration (HH:MM:SS)l
- Time of Day (HH:MM; hour and minute the call was released)
Station Number (l-4 digits)2
CO Line Number (001-l 44)
DK0322
Notes:
1. Call Duration (incoming, outgoing, or transfer) must be 1 or IO seconds (minimum) to generate a call record printout, "/t
can be set to 1.0 or IO seconds using Program 60-2.
2. "MSS": designates a Direct Inward System Access (DISA) or External Call Forward CO call to a station that is not
answered; or, answered after I or IO seconds per Program 60-2. The call will register as a normal incoming call if
answered before the threshold time (1.0 or 10 seconds depending on Program 60-2).
DISA calls always
register
65 - 66
seconds ring before answer duration time.
3. Field column information is provided for SMDR output formatting purposes.
4. The "*" indicates that the call was disconnected by the Central Office Calling Party Control (CPC) or Automatic Release
(AR) signal. Loop start CO lines must have Programs 15-O and 15-3 enabled to be dropped by the CPC signal.
General Notes:
l
"MODM": designates a call to the IMDU, Remote Maintenance Modem.
l
"DISA": designates a DISA or External Call Forward call thru the system via CO to CO connection.
l
The call record data is ASCII-formatted, 8 bits; no parity, l-stop bit.
l
Special dial printout:
Tone = "T"
Long pause = 'L "
Flash = 'F"
Pause = "P"
Figure 6-20
SMDR Printout Examples for DK280 Release 1 and 2
January 1996
6-29