Toshiba Strata DK 280 Installation Manual page 578

Program 42-I -8
- PBX/Centrex Access Codes
SELECT = 1 - 8 PBX Access Code Group
T-c
ACCESS CODE = Enter a 2-digit
Enter the PBX Group Number 1 - 8 that access code for the group, as defined
needs an access code assigned. by the table below. See Note 1.
5
6
7
8
Note:
1.
l
If access code is single digit, enter the first digit and press Button/LED 01
as
second
digit.
l
Press Button/L ED 0 I to delete a digit.
l
Press Button/LED 02 for don't care. For example, pressing 8 + Button/LED
02 allows 80 - 89.
General Notes:
l
For more information, see the instructions
preceding
the
record sheets.
l
Initialized data assigns no access codes to PBX goups.
l
Use this program to allow correct Toll Restriction and CentretiPBX transfer
operation.
l
Do not use this program if installing DK 280 CO lines behind "assume-g"
Cen trex.
1 O-l 64
January 1996