Toshiba Strata DK 280 Installation Manual page 490

Program 39 -
Flexible Button Assignment' (continued)
SELECT = Port Number
or range. See Note 2 to enter a range of ports.
Press LED/button to be defined.
See tables on the following pages.
Code: Enter the appropriate code that
corresponds to the feature to be assigned.
See the table below.
Button Function Button Labels
Save Last Dialed Number Save Last Number or SAVE
6
Code
485
Speed Dial Select (* Button)
Speed Dial or SDS 497
1 Station Speed Dial Codes 1 SD
System Speed Dial Codes"
SD
*10 - *49
*600- -k699
- or -
*60- *69
490
Tone
Tone Dial Select or TONE
Notes:
1. Some assignments are not available in Release 1 or 2.
2. Specify a range of ports by keying in:
q on~clclo
Low port7 L High port
Notes
Saves last number dialed for future speed dial.
Begins speed dial selection.
Reserves button for station speed dial.
Speed dial number set by station port 000.
CO dial signals set to tone or pulse.
DK0724
3. See Program *15 for Tenant Group assignments.
4. Picks up calls to telephones in any call pickup group to which the telephone is assigned in Program *3 1.
5. Available with RCTUA3, RCTUBA3/RCTUBB3 or RCTlJC/D3 Release 3 or above only.
6. RCTUA and RCTUA3 provide 40 system speed dial numbers (60 - 99), RCTUB, RCTUBAIRCTUBB, and RCTU C/D
provide 100 system speed dial numbers (600 - 699).
General Notes:
l
Attendant Consoles cannot be equipped with Secondary or Phantom [DNs]. The console Directory Number is
assigned to the console port number in Program 04. The console [DN] can have only one appearance.
l
Complete Program 38 before Program 39.
l
Initialized data assigns the keystrip pattern associated with Code 31 from Program 38.
1 o-74
January
1996