If1 Profidrive Sic/Scc Telegram Selection / If1 Sic/Scc Telegr; Profinet Name Of Station / Pn Name Of Station; Profinet Ip Of Station / Pn Ip Of Station - Siemens SINAMICS G150 Manual

Value: 0:
30:
31:
901:
902:
Dependency: Refer to: p9611, p9811
Note: For p9601.3 = p9801.3 = 1 (PROFIsafe enabled), the following variants exist when parameterizing PROFIsafe
telegram 30:
- p9611 = p9811 = 998 and p60022 = 0
- p9611 = p9811 = 998 and p60022 = 30
- p9611 = p9811 = 30 and p60022 = 30
p60122

IF1 PROFIdrive SIC/SCC telegram selection / IF1 SIC/SCC telegr

VECTOR_G Can be changed: T
Data type: Integer16
P-Group: Communications
Not for motor type: -
Min
700
Description: Sets the telegram for the safety information channel (SIC) / safety control channel (SCC).
The SIC/SCC telegram p60122 is attached directly to the PZD telegram p0922/p2079.
Value: 700:
701:
999:
Note: The clearance to the PZD telegram can be increased using p2070/p2071.
After changing p0922/p2079 or p2070/p2071, then p60122 must be set again.
The telegram interconnections can only be changed if p60122 and p0922 are both set to 999.
r61000[0...239]

PROFINET Name of Station / PN Name of Station

CU_G130_DP Can be changed: -
(PROFINET CBE20),
Data type: Unsigned8
CU_G130_PN,
P-Group: -
CU_G150_DP
Not for motor type: -
(PROFINET CBE20),
CU_G150_PN
Min
-
Description: Displays PROFINET Name of Station.
Notice: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
r61001[0...3]

PROFINET IP of Station / PN IP of Station

CU_G130_DP Can be changed: -
(PROFINET CBE20),
Data type: Unsigned8
CU_G130_PN,
P-Group: -
CU_G150_DP
Not for motor type: -
(PROFINET CBE20),
CU_G150_PN
Min
-
Description: Displays PROFINET IP of Station.
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
No PROFIsafe telegram selected
PROFIsafe standard telegram 30, PZD-1/1
PROFIsafe standard telegram 31, PZD-2/2
PROFIsafe SIEMENS telegram 901, PZD-3/5
PROFIsafe SIEMENS telegram 902, PZD-3/6
Supplementary telegram 700, PZD-0/3
Supplementary telegram 701, PZD-2/5
Free telegram configuration with BICO
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
999
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: 2423
Unit selection: -
Expert list: 1
Factory setting
999
Access level: 3
Func. diagram: 2410
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: 2410
Unit selection: -
Expert list: 1
Factory setting
-
1001