Co: Par_Circuit Max. Deviation Currents Phase V / Phase V Max I_Dev; Co: Par_Circuit Max. Deviation Currents Phase W / Phase W Max I_Dev; Co: Par_Circuit Dc Link Voltage Deviation / Vdc Deviation; Co: Par_Circuit Dc Link Voltage Maximum Deviation / Vdc Deviation Max. - Siemens SINAMICS G150 Manual

r7026

CO: Par_circuit max. deviation currents phase V / Phase V Max i_dev

VECTOR_G (Parallel) Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [A]
Description: Displays the maximum absolute deviation of the measured current actual values of phase V from the average value
as peak value.
The deviation of the individual currents from the average value is displayed in r7021.
Dependency: Refer to: r7021, r7025, r7027
r7027

CO: Par_circuit max. deviation currents phase W / Phase W Max i_dev

VECTOR_G (Parallel) Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [A]
Description: Displays the maximum absolute deviation of the measured current actual values of phase W from the average value
as peak value.
The deviation of the individual currents from the average value is displayed in r7022.
Dependency: Refer to: r7022, r7025, r7026
r7030[0...n]

CO: Par_circuit DC link voltage deviation / Vdc deviation

B_INF (Parallel), Can be changed: -
VECTOR_G (Parallel)
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [V]
Description: Displays the deviation of the measured DC link voltage from the average value.
The maximum deviation from the average value is displayed in r7031.
Dependency: Refer to: r7031
r7031

CO: Par_circuit DC link voltage maximum deviation / Vdc deviation max.

B_INF (Parallel), Can be changed: -
VECTOR_G (Parallel)
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [V]
Description: Displays the maximum absolute deviation of the measured DC link voltage from the average value.
The deviation of the individual voltages from the average value is displayed in r7030.
Dependency: Refer to: r7030
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
Calculated: -
Dyn. index: -
Units group: 6_5
Scaling: p2002
Max
- [A]
Calculated: -
Dyn. index: -
Units group: 6_5
Scaling: p2002
Max
- [A]
Calculated: -
Dyn. index: PDS, p0120
Units group: -
Scaling: p2001
Max
- [V]
Calculated: -
Dyn. index: -
Units group: -
Scaling: p2001
Max
- [V]
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: p0505
Expert list: 1
Factory setting
- [A]
Access level: 3
Func. diagram: -
Unit selection: p0505
Expert list: 1
Factory setting
- [A]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [V]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [V]
703