Off Delay N_Act = N_Set / T_Del_Off N_I=N_So; Switch-On Delay N_Act = N_Set / T_On N_Act=N_Set; Co: Actual Speed Smoothed Signals / N_Act Smth Message; Torque Threshold Value 1 / M_Thresh Val 1 - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
Dependency: Refer to: p2163, p2166, r2197
p2166[0...n]

Off delay n_act = n_set / t_del_off n_i=n_so

VECTOR_G Can be changed: U, T
Data type: FloatingPoint32
P-Group: Messages
Not for motor type: -
Min
0.0 [ms]
Description: Sets the switch-off delay time for the "speed setpoint - actual value deviation in tolerance t_off" signal/message (BO:
r2197.7).
Dependency: Refer to: p2163, p2164, r2197
p2167[0...n]

Switch-on delay n_act = n_set / t_on n_act=n_set

VECTOR_G Can be changed: U, T
Data type: FloatingPoint32
P-Group: Messages
Not for motor type: -
Min
0.0 [ms]
Description: Sets the switch-on delay for the "speed setpoint - actual value deviation in tolerance t_on" signal/message (BO:
r2199.4).
r2169

CO: Actual speed smoothed signals / n_act smth message

VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Messages
Not for motor type: -
Min
- [rpm]
Description: Display and connector output of the smoothed speed actual value for messages.
Dependency: Refer to: p2153
p2174[0...n]

Torque threshold value 1 / M_thresh val 1

VECTOR_G Can be changed: U, T
Data type: FloatingPoint32
P-Group: Messages
Not for motor type: -
Min
0.00 [Nm]
Description: Sets the torque threshold value for the messages:
"Torque setpoint < torque threshold value 1 and n_set reached" (BO: r2198.9)
"Torque setpoint < torque threshold value 1" (BO: r2198.10)
"Torque setpoint > torque threshold value 1" (BO: r2198.13)
Dependency: Refer to: p2195, r2198
520
Calculated: -
Dyn. index: DDS, p0180
Units group: -
Scaling: -
Max
10000.0 [ms]
Calculated: -
Dyn. index: DDS, p0180
Units group: -
Scaling: -
Max
10000.0 [ms]
Calculated: -
Dyn. index: -
Units group: 3_1
Scaling: p2000
Max
- [rpm]
Calculated: -
Dyn. index: DDS, p0180
Units group: 7_1
Scaling: -
Max
20000000.00 [Nm]
List Manual (LH2), 04/2014, A5E03263479A
Access level: 2
Func. diagram: 8011
Unit selection: -
Expert list: 1
Factory setting
200.0 [ms]
Access level: 2
Func. diagram: 8011
Unit selection: -
Expert list: 1
Factory setting
200.0 [ms]
Access level: 2
Func. diagram: 8010
Unit selection: p0505
Expert list: 1
Factory setting
- [rpm]
Access level: 2
Func. diagram: 8012
Unit selection: p0505
Expert list: 1
Factory setting
5.13 [Nm]
SINAMICS G130/G150