2 Parameters
2.2 List of parameters
Index x + 2 = 20 hex (blank) --> separation between the identification number of serial number
Index x + 3 = first character of the serial number
...
Index y with contents = last character of the serial number
Dependency:
Refer to: r0460, r0461, r0462, r0463, r0464
Notice:
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Note:
The individual characters of the identification number/serial number are available coded as ASCII characters.
r0469
Absolute encoder linear measuring step / Enc lin meas step
ENC
Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Not for motor type: -
Min
- [nm]
Description:
Displays the resolution of the absolute position for a linear absolute encoder.
Dependency:
Refer to: p0422, p9514
r0469[0...2]
Absolute encoder linear measuring step / Enc lin meas step
VECTOR_G
Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Not for motor type: -
Min
- [nm]
Description:
Displays the resolution of the absolute position for a linear absolute encoder.
Index:
[0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency:
Refer to: p0422, p9514
r0470
Redundant coarse position value valid bits / Valid bits
ENC
Can be changed: -
Data type: Unsigned16
P-Group: Encoder
Not for motor type: -
Min
-
Description:
Displays the valid bits of the redundant coarse position value.
Dependency:
Refer to: p9323, p9523
r0470[0...2]
Redundant coarse position value valid bits / Valid bits
VECTOR_G
Can be changed: -
Data type: Unsigned16
P-Group: Encoder
Not for motor type: -
Min
-
Description:
Displays the valid bits of the redundant coarse position value.
Index:
[0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency:
Refer to: p9323, p9523
184
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
- [nm]
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
- [nm]
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
List Manual (LH2), 04/2014, A5E03263479A
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [nm]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [nm]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS G130/G150