2 Parameters
2.2 List of parameters
r1913[0...2]
Identified rotor time constant / T_rotor ident
VECTOR_G
Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: PEM
Min
- [ms]
Description:
Displays the identified rotor time constant.
Index:
[0] = Phase U
[1] = Phase V
[2] = Phase W
r1914[0...2]
Identified total leakage inductance / L_total_leak ident
VECTOR_G
Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [mH]
Description:
Displays the identified total leakage inductance.
Index:
[0] = Phase U
[1] = Phase V
[2] = Phase W
r1915[0...2]
Identified nominal stator inductance / L_stator ident
VECTOR_G
Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [mH]
Description:
Displays the nominal stator inductance identified.
Index:
[0] = Phase U
[1] = Phase V
[2] = Phase W
r1916[0...2]
Identified stator inductance 1 / L_stator 1 ident
VECTOR_G
Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [mH]
Description:
Displays the nominal stator inductance identified for the 1st point of the saturation characteristic.
Index:
[0] = Phase U
[1] = Phase V
[2] = Phase W
446
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
- [ms]
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
- [mH]
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
- [mH]
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
- [mH]
List Manual (LH2), 04/2014, A5E03263479A
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [ms]
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [mH]
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [mH]
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [mH]
SINAMICS G130/G150