Installing The 9.5" Gateway (Chs2U Gw) Chassis (Au Only); Figure 3-25 9.5" Chassis (Front View) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
2.4
System Hardware Manual

Installing the 9.5" Gateway (CHS2U GW) chassis (AU Only)

The CHS2U GW chassis have three universal blade slots for station, trunk and
optional blades.
Before proceeding with installation of chassis, ensure site preparation is
completed. The Gateway (CHS2U GW) chassis can be:
Wall-mounted – refer to

chassis (AU Only) on page
Stand-mounted – refer to

GW) chassis (AU Only) on page
From the factory, the SG, ETH and PBXG grounds are located inside the
chassis and are connected to the FG (frame ground) on the back of the
chassis.

Figure 3-25 9.5" Chassis (Front View)

3.2 Wall Mounting the 9.5" Gateway (CHS2U GW)
3-27.
5.2 Stand Mounting the 9.5" Gateway (CHS2U
3-50.
Issue 9.0
3 - 17