Installation; Table 4-12 Compactflash Voice Mail Specifications - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
4 - 28
Depending on the compact flash card used, the voice mail can
provide:

Table 4-12 CompactFlash Voice Mail Specifications

UNIVERGE SV8100 VM8000 InMail
AKS VRS OT
(OT)
AKS VRS-VM OT
(OT)
AKS InMail AU
(AU)
AKS InMail 1GB AU
(AU)
LKS-VM-
LANGUAGE1-LIC
3.3.2

Installation

To install a PZ-VM21 on the CD-CP00:
Do not remove or install the CD-CP00 with the
power on.
1. Four plastic spacers are included with the PZ-VM21. Install the
plastic spacers on the PZ-VM21. Make sure to attach the
spacers so that they extend out on the side of the daughter
board which has the CN1 connector. Refer to
Installing the PZ-VM21 on page
2. For installation on the CD-CP00 blade refer to
CD-CP00 Blade with Daughter Boards Installed on page
3. Position the PZ-VM21 CN1 connector over the CN4 connector
on the CD-CP00
ensuring the plastic spacers lock in place.
4. Insert the CompactFlash card into the CN2 slot.
The LED1 status light is on steady when a card is installed.

Part Names and Capacities
UNIVERGE SV8100 VM8000 VRS 256M Drive Compact
Flash Card with VRS software.
UNIVERGE SV8100 VM8000 VRS/InMail 512M Drive
32-hour Compact Flash Card with software.
Station Mailboxes = 512

Routing Mailboxes = 32

Group Mailboxes = 32

Total Mailboxes = 576

UNIVERGE SV8100 VM8000 VRS/InMail 1GB Drive
Compact Flash Card with software.
Language License
. Press the blade and board together,
blade
UNIVERGE SV8100
Figure 4-10
4-29.
Figure 4-6
Installing the SV8100 Blades
4-15.