Wall Mounting A Multiline Terminal Using The Base Plate; Adjusting The Hanger Hook; Figure 8-28 Removing The Hanger Hook On A Multiline Terminal; Figure 8-29 Sliding The Hanger Hook Into Position - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
S 11 W
ECTION ALL
You can wall mount a DTR connection multiline terminal (except for DTR-2D-1 TEL)
using the base cover or an optional wall mount unit. A wall mount unit must be used if
adapters are installed on the multiline terminal.
11.1
8 - 22
M M
OUNTING ULTILINE

Wall Mounting a Multiline Terminal using the Base Plate

11.1.1

Adjusting the Hanger Hook

1. Remove the hook from the unit.
Hanger Hook

Figure 8-28 Removing the Hanger Hook on a Multiline Terminal

2. Turn the hook with the tab toward the top.
3. Slide the hook until it glides into position forming the hanger
hook for the handset.
T
ERMINALS

Figure 8-29 Sliding the Hanger Hook into Position

Installing D
UNIVERGE SV8100
term
Series i Telephones