Multiple Sv8100 To Ipk/Ipk Ii Chassis Connectivity; Figure 4-20 Multiple Sv8100 To Ipk/Ipk Ii Connection (Layout 1) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
3.6.2.2

Multiple SV8100 to IPK/IPK II Chassis Connectivity

In addition to the cabinet/chassis layout shown above, with
Version 4.00 or higher software the following
configurations are also supported:
Layout 1: Refer to
II Connection (Layout
MGN-U13 ETU (Migration Board) and two cables are
connected to the (PZ-BS11).

Figure 4-20 Multiple SV8100 to IPK/IPK II Connection (Layout 1)

Slot Layout:
Slot 1 ~ 6: 1st SV8100 chassis slots 1 ~ 6

Slot 7 ~ 11: 1st IPK II cabinet slots 1 ~ 5

Slot 13 ~ 24: 2nd and 3rd SV8100 chassis slots, 1 ~ 6

each
Slot 12 is used for B channel highway and cannot support the

hardware.
Figure 4-20 Multiple SV8100 to IPK/IPK
1). One cable is connected to the
Issue 9.0
4 - 43