Switch Settings; Pz-32Ipla/Pz-64Ipla/Pz-128Ipla (Voice Over Ip Daughter Boards); Description; Figure 4-11 Ipla Daughter Board - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Switch Settings

This daughter board does not have any switch that needs to be set

and does not require any hardware setting.

PZ-32IPLA/PZ-64IPLA/PZ-128IPLA (Voice over IP Daughter

The PZ-32IPLA/PZ-64IPLA/PZ-128IPLA daughter board is used to

convert the RTP (Real Time Transfer Protocol) packets via the IP

network and PCM highway. The daughter board is installed on the

CD-CP00. The IP telephones are connected directly to the IP bus.

When IP telephones must be connected to a conventional PCM-

based digital circuit, this board converts the IP packet signal to a

PCM signal format and connects to the PCM time division switch.

The PZ-32IPLA/PZ-64IPLA/PZ-128IPLA daughter board is required

for IP telephones to communicate with non-VoIP UNIVERGE

SV8100 telephones, and place or receive outside calls.

The IPLA daughter board provides the voice (RTP/RTCP)

processing function. The call control function is mounted on the

CD-CP00. Only one version of the IPLA daughter board

(PZ-32IPLA, PZ-64IPLA or PZ-128IPLA) can be installed on the

UNIVERGE SV8100

Installing the SV8100 Blades