Installing The Ip Video Doorphone Using A Wall Mount Bracket (Ip3Ww-Cdh Bracket Set); Figure 7-88 Installing The Ip Video Doorphone Using Wall Mount Bracket Set - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

Secure Main body and Mounting Bracket with the retaining

Mount the Screw Cover.

Installing the IP Video Doorphone Using a Wall Mount Bracket

(IP3WW-CDH BRACKET SET)

Loosen the Main Body fixed screw and remove the Main Body

from the Mounting Bracket.

The Rear Cover is mounted to the Wall Mounting Plate (on the

wall) using two wood screws (3.8x20mm) or M4x25mm screws.

Insert the Bracket tab into the top of the Rear Cover.

Secure the Main Body and Rear Cover with the retaining screw.

When there is a gap between the Wall

Mounting Plate (on the wall) and the Bracket,

the Bracket may be warped due to an over-

tightened screw. Simply loosen the screw.