Chs Large Batt Box Fuse Replacement; Power Supply; Figure 3-108 Chs Large Batt Box To Chs2U Gw Connection - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
P
S 8
OWER
ECTION
3 - 80

Figure 3-108 CHS LARGE BATT BOX to CHS2U GW Connection

6. Reconnect AC power cable to rear of 9.5" chassis.
7. To power on the 9.5" chassis, refer to
Up the SV8100 System on page
7.4.3

CHS LARGE BATT BOX Fuse Replacement

8. To replace the fuse(s) in the CHS LARGE BATT BOX, refer to
Chapter
Replacement on page
S
UPPLY
Do not attempt to replace the power supply on the CHS2U or
CHS2U GW(AU Only) chassis. The MPS7101 is not a field
replaceable part. If the power supply fails, contact NEC.
3, section 7.2.4 CHS LARGE BATT BOX Fuse
3-70.
UNIVERGE SV8100
Chapter 4, 2.6 Powering
4-8.
Installing the SV8100 Chassis