Connecting The Ac Adapter; Figure 9-4 Ac-2R/Ac-3R Unit (Ac Adapter); Figure 9-5 Connecting The Ac Adapter To An Installed Adapter; Section 2 Preparing Multiline Terminal For Adapter Installation - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
3.1.3

Connecting the AC Adapter

1. Unplug the AC Adapter from the AC outlet.
2. Prepare the multiline terminal for adapter installation. Refer to

Section 2 Preparing Multiline Terminal for Adapter Installation

on page
3. The Plug Puller shown in
Adapter)
rim on the base. The plug of the adapter is inserted in this hole,
and the sleeve is pulled over the back of the plug to seat the
post that can then be used to unplug the adapter.
4. Locate the plug on the ancillary device that is connected to the
bottom of the multiline terminal and plug in the AC Adapter.

Figure 9-5 Connecting the AC Adapter to an Installed Adapter

Failing to do this can damage the unit and/or
the multiline terminal.
9-1.
Figure 9-4 AC-2R/AC-3R Unit (AC
is a hollow cylindrical sleeve with a post and a circular
Issue 9.0
9 - 5