Floor Mounting The Chs Large Batt Box; Figure 3-77 Floor Mount Spacing Guide - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3 - 62
7.2.1

Floor Mounting the CHS LARGE BATT BOX





1. Use the template shown in
Guide
(10mm) anchor bolts (locally procured).
Because of injury from falling equipment, wall
mounting the CHS LARGE BATT BOX is not
recommended.
Mounting the CHS LARGE BATT BOX directly
on the floor is not recommended.
The CHS BASE UNIT raises the height of the
CHS LARGE BATT BOX 120mm (4.72").
When the CHS LARGE BATT BOX and
CHS2U are connected for long term use, the
CHS2U JOINT BRACKET KIT is used.
Figure 3-77 Floor Mount Spacing
for required spacing before drilling holes for 0.39"

Figure 3-77 Floor Mount Spacing Guide

UNIVERGE SV8100
Installing the SV8100 Chassis