Figure 3-70 Secure Cable In Support Bracket; Figure 3-71 Installing Cable Support Guide - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3 - 58
5. Using tie wraps, secure CHS2U BATT CABLE INT in cable guide
bracket.

Figure 3-70 Secure Cable in Support Bracket

6. With supplied screw, install cable guide in chassis.
7. Install two 2.3 AH-12V batteries (locally procured) into the CHS2U BATT
MTG KIT (refer to
The first battery must be installed on the left side, then slid to the right due to an

installation tab on the mounting kit.

Figure 3-71 Installing Cable Support Guide

Figure 3-72 Installing Two Batteries on page
UNIVERGE SV8100
3-59).
Installing the SV8100 Chassis