Using Adapters; In-Line Power Adapter (Ilpa-R); Figure 7-19 Installing Adapters - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
T
S 10
ELEPHONE
ECTION
10.1
10.2
7 - 28
A
DAPTERS

Using Adapters

The modular terminals can support installing one additional adapter
underneath the terminal. These adapters provide the multiline terminal
different abilities, depending on the adapter installed.
These optional adapters are not installed on non-modular telephones.

Only the ILPA, ADA and PSA Adapters can be used on the IP phones.

ADA – Conversation Recording

APR – analogue Port Adapter with Ringer

PSA – Multiline Terminal /IP Phone Power Failure

Before installing or removing the adapter,
unplugged from the system. External power is not required for the adapter.
Telephones with any adapter installed require an optional wall mount unit
(WM-L) to be wall mounted. The bracket does not accommodate the
adapter(s).

In-line Power Adapter (ILPA-R)

The In-Line Power Adapter (ILPA-R), which is IEEE 802.3af compliant, detects
power from a PoE-compatible ethernet switch and passes it to the IP terminal.
The ILPA does the negotiation and detection with the switch and then relays
the power to the IP terminal device. This provides an additional way to power
the NEC IP terminals. With this adapter, the IP terminals on the UNIVERGE
SV8100 system can be powered using:
Local power connecting the IP terminal to a local AC wall outlet using the

AC-R Adapter

Figure 7-19 Installing Adapters

the multiline terminal should be
Installing SV8100 Optional Equipment
UNIVERGE SV8100