Removing The Wall Mounted Multiline Terminal From The Base Plate; Wall Mounting The Base Plate On A Wall Plate; Figure 8-36 Removing The Multiline Terminal; Figure 8-37 Wall Mounting Base Plate On A Wall Plate - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
8 - 26
11.1.3

Removing the Wall Mounted Multiline Terminal from the Base Plate

To remove the multiline terminal, press the tabs at the bottom as
shown in Figure 8-36 Removing the Multiline
on the Telephone until it comes loose.
11.1.4

Wall Mounting the Base Plate on a Wall Plate

1. Locate the screw holes on the base cover and hang the cover
over the screws on the wall plate as illustrated in
Wall Mounting Base Plate on a Wall

Figure 8-37 Wall Mounting Base Plate on a Wall Plate

Figure 8-36 Removing the Multiline Terminal

Installing D
UNIVERGE SV8100
Terminal, and push up
Figure 8-37
Plate.
term
Series i Telephones