Unmanaged Switch Functions; Led Indications; Connectors; Table 4-52 Cd-Etia Led Indications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
2. User removes Add-on blade and moves it to slot 6.
3. User relocates the Main blade to slot 4.
The grouping of the three CD-ETIA blades to form a 20 port
switch is restricted to reside in a single system location. The
grouping is not allowed where the CD-ETIA blades are
placed as part of the NetLink feature in the Univerge
SV8100 system.
6.4.2.5

Unmanaged Switch Functions

In the unmanaged mode, a CD-ETIA blade has the following
functions only:


6.4.3

LED Indications

1000Mbps Link
10/100Mbps Link
No Link
Port Activity
6.4.4

Connectors

Backplane Connector – J1 connection to system CD-CP00 board
and other blades in the chassis.
The re-inserted blade automatically gets ports 17 ~

24 (9 ~ 16 are unavailable)
User can erase the ports 9 ~ 16.

Then reinsert the blade in slot 6 to get ports 9 ~ 16.

None of the port numbers change. However, the

programming in Program 10-55 must be changed to
reflect this move
Base-TX
10 Base-T/100
(x8)
PoE Class 3 (lowest power class)

Table 4-52 CD-ETIA LED Indications

Port State
Issue 9.0
Base-T
Ethernet ports
/1000 )
LED Display
Green Solid
Yellow Solid
Off
LED Blinking
4 - 119