UNIVERGE SV8100
System Hardware Manual
4.1.1
Installing an HF-R Unit
1.
With the terminal upside down, facing from the bottom of the
open cover, install this unit in terminal adapter Slot 1.
Figure 9-28 Attaching the HF-R Unit to the Multiline Terminal
2.
Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked
C. Refer to
Terminal.
3.
Replace the base plate (or wall mount unit) and attach the line
cord. Refer to
System on page
Figure 9-28 Attaching the HF-R Unit to the Multiline
Section 3 Connecting a Multiline Terminal to the
8-12.
Issue 9.0
9 - 27