Led Indications; Table 4-22 Sw1 Mgn-U13 Etu; Table 4-23 Sw2 Mgn-U13 Etu; Table 4-24 Mgn-U13 Etu Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
Switch
SW2
LED 1
(FS1_ACT)
LED 2
(FS2_ACT)
LED 3
(FS3_ACT)
LED 4
(LIVE)
4 - 50
Refer to

Table 4-22 SW1 MGN-U13 ETU

MGN-U13 ETU
Switch
SW1 (RESET)
Bit1 Bit2
OFF OFF
ON OFF
OFF ON
ON ON
3.6.8

LED Indications

LEDs for the MGN-U13 ETU are described in
ETU LED Indications. Each LED is listed with its associated function
and LED and Operational status.
All LEDs are mounted on solder side.


Table 4-24 MGN-U13 ETU LED Indications

Description
LED
Link status of
cable 1
Link status of
cable 2
Link status of
cable 3
Unit status
for a brief description of SW1 and SW2.
Table 4-22 SW1 MGN-U13 ETU
Description
Momentary switch
Resets the operation of the card

Table 4-23 SW2 MGN-U13 ETU

Bit3 Bit4 Mode
Normal
Operation
Monitor
Don't Don't
Program
Care Care
FROM
Loader
Test
Program
On
Link Established
Link Established
Link Established
Operation stopped
(Power On)
UNIVERGE SV8100
and Table 4-23 SW2
Description
Default
For maintenance use
For firmware update
Manufacture inspection mode
Table 4-24 MGN-U13
Off Flashing
Link down N/A
Link down N/A
Link down N/A
No Power Normal Operation
(1sec ON/1sec OFF)
Installing the SV8100 Blades