UNIVERGE SV8100
System Hardware Manual
1.
Remove the screw from the front of the PGD Adapter.
Figure 7-2 Remove Cover from PGD Adapter
2.
Using a screwdriver, break out the plastic piece covering the cable hole.
Figure 7-3 Remove Plastic Cover from Cable Hole
3.
Set the S3 – S6 jumpers to the proper settings for the function to be used
(refer to
Table 7-2 PGD Adapter S3 – S6 Jumper Settings on page
Issue 9.0
7-4).
7 - 3