Busy Led - Red; Application Led - Red/Green (Dual Color); Compactflash Card Activity Led - Red; Connectors - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
6.1.3.2 Busy LED – Red
The Busy LED is controlled by the DSP and indicates the
port status.


6.1.3.3 Application LED – Red/Green (Dual Color)
The Application LED is controlled by the DSP indicates the
state of the software running on the CD-VM00 .





6.1.3.4 CompactFlash Card Activity LED – Red
The CompactFlash Card Activity LED is controlled by the
IDE controller and indicates read/write activity on the
CompactFlash card.
6.1.4

Connectors

The following sections go into detail on each user interface.
6.1.4.1 RS-232 Interface
The RJ-11 connector with DB9 adapter is used for
connection to an external PMS Application or the PMSU.
The cable used for a PC type DTE connection is a standard
line cord shown in
connection for a DCE device uses the swapped line cord
shown in
Off: Power off or idle.
On: Reset.
Off: Power off.
Solid Red/Green (Yellow): Reset.
Flashing Green: OS is running, application not started.
Solid Green: Application running.
Solid Red: Application problem.
6.1.4.3 RS-232 Serial Cable
6.1.4.4 RS-232 Serial Cable
Issue 9.0
(DTE). The
(DCE).
4 - 105