Wall Mounting The Multiline Terminal; Figure 8-30 Removing The Cutout; Figure 8-31 Bundling The Line Cord - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
11.1.2

Wall Mounting the Multiline Terminal

1. Extend and remove the base cover from the telephone. Refer
to Section 10 Removing or Installing the Base Plate on a
Multiline
2. Remove cutout shown in
3. Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest as shown in
the Line
Terminal.
Figure 8-30 Removing the

Figure 8-30 Removing the Cutout

Cord.

Figure 8-31 Bundling the Line Cord

Issue 9.0
Cutout.
Figure 8-31 Bundling
8 - 23