Issue 9.0
4 - 42
3.6.2
Conditions
The IPK/IPKII systems are limited to 18 total card slots.
An IPK system can support the migration card, provided the cards and
terminals are listed below as being supported. It may be necessary to
upgrade firmware as noted.
MEGACO is not supported.
3.6.2.1
Single SV8100 to IPK/IPK II Chassis Connectivity
Figure 4-19 SV8100 to IPK/IPK II Connection
typical connection layout of the SV8100 and IPK/IPK II with
Version 4.00 or lower.
IPK/IPK II
Slot Layout:
CAT5 LAN Cable x 3
Maximum Length: 3' 9"
(1.2m)
Figure 4-19 SV8100 to IPK/IPK II Connection
Slot 1 ~ 6: 1st SV8100 chassis slots 1 ~ 6
Slot 7 ~ 14: 1st IPK II cabinet slots 1 ~ 8
Slot 15 ~ 22: 2nd IPK II cabinet slots 1 ~ 8
Slot 23 ~ 24: 3rd IPK II cabinet slots 1 ~ 2
UNIVERGE SV8100
illustrates a
SV8100
MGN-U13 ETU
Installing the SV8100 Blades