Led Indications; Setting Up Pgd Adapter Connections; Figure 7-1 Pgd Adapter; Table 7-1 Pgd Adapter Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
2.2
2.3
7 - 2
The PGD Adapter connects to any available digital extension port. The
terminal connections made in the PGD Adapter and the jumper settings
determine what features are used for each circuit.
Channel 1
Status LED

LED Indications

Table 7-1 PGD Adapter LED Indications

LED Indication
LED 1 Green LED when
CH1 in use.
LED 2 Green LED when
CH2 in use.

Setting up PGD Adapter Connections

If the PGD Adapter is to be wall mounted, all the cable connections should

be made first.
For the module to ID correctly after setting the jumpers, set the circuit type

to 0 for the module port in Program 10-03-01 prior to connecting the line
cord to the PGD Adapter.
Channel 2
Status LED

Figure 7-1 PGD Adapter

Flashing green LED indicates DIP Switch
setting and programming for CH1 are
conflicting.
Flashing green LED indicates DIP Switch
setting and programming for CH2 are
conflicting.
Installing SV8100 Optional Equipment
UNIVERGE SV8100
Note