Siemens SINAMICS S120 Function Manual page 695

Probe time stamp
For telegram 395, there is no telegram location reference from the time stamp to the probe
and edge. The assignment is therefore made for four time stamps using probe references.
Table 10- 52 Assignment, probe time stamp reference to time stamp
Probe
MT_ZSB1
MT_ZSB2
MT_ZSB3
MT_ZSB4
The probe time stamp reference PZDs are BiCo parameters, which are automatically
connected with the indices of the new display parameter r0566[4] when the telegram block is
selected. After activating the measuring function for several measured values per DP cycle,
the time stamp references are saved for transfer in the indices of r0566[4].
The probe time stamp reference PZDs are BiCo parameters, which are automatically
connected with the indices of the new display parameter r0566[4] when the telegram block is
selected. After activating the measuring function for several measured values per DP cycle,
the time stamp references are saved for transfer in the indices of r0566[4].
After activating the measuring function for several measured values per DP cycle, the time
stamp references are saved for transfer in the indices of r0566[4]. Only the value of the time
stamp can be used to identify as to whether the referenced time stamp is a valid measured
value. For a valid time stamp, the consistency to the time stamp reference must be
guaranteed in each DP cycle.
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
10.1 Communication according to PROFIdrive
Time stamp reference
Reference ZS1
Reference ZS2
Reference ZS3
Reference ZS4
Reference ZS5
Reference ZS6
Reference ZS7
Reference ZS8
Reference ZS9
Reference ZS10
Reference ZS11
Reference ZS12
Reference ZS13
Reference ZS14
Reference ZS15
Reference ZS16
Communication
Bit
Bits 0...3
Bits 4...7
Bits 8...11
Bits 12...15
Bits 0...3
Bits 4...7
Bits 8...11
Bits 12...15
Bits 0...3
Bits 4...7
Bits 8...11
Bits 12...15
Bits 0...3
Bits 4...7
Bits 8...11
Bits 12...15
693