Figure 8-33
Removing Crossbar Cable (Electrical)
1.
Remove two crossbar cables (electrical) from SPARC M10-4S.
Hold the tab (A in the figure) of the crossbar cable (electrical), and pull it straight
in the arrow direction to remove it. At this time, do not pull out the crossbar
cable by holding the cable part. If you pull the cable part, the connector is not
unlocked completely, which may cause a damage.
2.
Remove two crossbar cables (electrical) from the other cabinet.
Hold the tab (A in the figure) of the crossbar cable (electrical), and pull it straight
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ・ October 2013
112
Clip positions of CPU memory unit and side guides