Removing Cable For Connecting Terminal Board And Fan Backplane - Fujitsu M10 Product Notes

Figure B-12
Removing cable for connecting terminal board and
fan backplane
Remove the cable (SIG) or cable (PWR) connecting the terminal board and fan
backplane.
1.
Remove the front cover.
For details, see "5.4.3 Removing front cover."
2.
Remove all the fan units.
For details, see "19.4 Removing Fan Unit."
3.
Loosen two screws (A in the figure) of the upper cover and slide the right and
left stoppers (B in the figure) inward. Then, remove the upper cover (C in the
figure).
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
144
Removing cables