Fujitsu M10 Product Notes page 93

crossbar unit #2. Implement the cables according to the labels.
Hold the connector part of the crossbar cable (optical) and insert it straight
into the opening. Do not hold the cable part when inserting the cable.
Note－There are two types of crossbar cables (optical). Connect cables of the same type to the
same port number. Cables can be distinguished by tab shape. For tab shape, see Figure 8-2.
Figure 8-1
Tabs and pull-out directions of crossbar cables
Figure 8-2 Shape and tab of crossbar cable (optical)
(1)
Number in figure Description
1 Tab
(1)
Chapter 8 Contents of Revision of Documentation 81