Fujitsu M10 Product Notes page 142

Figure A-6
2.
Install the PSU backplane.
3.
Confirm that the two fixing pins are inserted into the PSU backplane. Then,
slide the PSU backplane to the rear side of the cabinet.
4.
Tighten the one screw that fixes the PSU backplane.
5.
Connect the three cables connecting the PSU backplane with the motherboard
unit.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
130
Cable for PSU backplane
A