Fujitsu M10 Product Notes page 153

Figure B-8
Removing cables
6.
Loosen three screws of the fan shelf and partially pull out the fan shelf.
Figure B-9
Removing fan shelf
7.
Support the fan shelf from the bottom with one hand and remove it carefully
from the cabinet.
Note - Remove the fan shelf with careful attention to the two cables arranged in the center.
Note - Place the removed fan shelf on a grounded antistatic ESD mat.
8.
Remove the cable connected to the crossbar backplane unit from the connector.
Appendix B Maintaining Cable Kit of Crossbar Box 141