Fujitsu M10 Product Notes page 55

Table 3-4
Problems that might occur in any versions of Oracle Solaris and their workarounds (continued)
SPARC
CR ID M10-1
15858713 x
15887244 x
SPARC SPARC
M10-4 M10-4S Description
x x If a memory error occurs and all
the memories assigned to the
guest domain are degraded,
ldmd(1M) causes a core dump
to abnormally terminate and the
ldm(1M) command ends with
an error.
x x When you start the SunVTS 7.0
ps14 and ps15 tests in a SPARC
M10 system, they may
terminate with an error.
Workaround
Replace the memory having an
error.
If you want to start Oracle
Solaris while the memory
having an error remains to be
mounted, start it using the
following procedure from
XSCF.
1. Execute the poweroff(8)
command to turn off the
power of the physical
partitions (PPARs).
2. Execute the setdomainconfig
(8) command to restore
PPARs to their factory-
default state.
setdomainconfig -p
ppar_id -c default
3. Execute the poweron(8)
command to start the PPARs.
Oracle Solaris is started in the
factory-default configuration
which consists of only control
domains.
SunVTS is not supported for
SPARC M10 systems.
Chapter 3 Information on Software 43