Fujitsu M10 Product Notes page 96

Table 8-2
Contents of revision of SPARC M10-1 Service Manual
Section number or name
Preface
1.2
7.1
7.2.2
7.5.1
Chapter 16
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
84
Contents of revision
The following description will be removed. It will be described under "Audience."
It is intended for users with advanced knowledge of hardware troubleshooting and
replacement.
The following description will be added.
The maintenance tasks are performed by the service and field engineers of Fujitsu.
The description under "Audience" will be changed to the following:
This document is designed for service engineers who are in charge of system
maintenance, and field engineers.
The URL of Fujitsu documents provided in "Related Documentation" will be
changed as follows:
Fujitsu documents
■
http://jp.fujitsu.com/platform/server/sparc/manual
The URL of the Japanese web site provided in "Documentation Feedback" will be
changed as follows:
Japanese site
■
http://jp.fujitsu.com/platform/server/sparc/manual
The certification standards on the standard label described in "1.2 Labels/Tags" will
be changed to the following:
Safety: NRTL/C
■
Radio wave: VCCI-A, FCC-A, DOC-A, KCC, and C-Tick
■
Safety and radio wave: CE, CCC, BSMI, and GOST-R
■
The following caution will be added to "7.1 Location of Motherboard Unit":
Caution - Do not replace a motherboard unit together with a PSU backplane. If you
replace a motherboard unit together with a PSU backplane, the system fails to
operate normally. Replace a motherboard unit or PSU backplane, and confirm that
the newly installed Field Replaceable Unit (FRU) is normal by using the showhardconf
or showstatus command. Then, replace the other FRU.
The following caution will be moved to "7.1 Location of Motherboard Unit" and
deleted from "7.2.2 Precautions for replacement":
Do not replace the motherboard unit and the PSU backplane at the same time.
■
If you replace the motherboard unit together with the PSU backplane, the system
fails to operate normally. Replace a motherboard unit or PSU backplane, and
confirm that the newly installed Field Replaceable Unit (FRU) is normal by using
the showhardconf or showstatus command. Then, replace the other FRU.
Procedure to store cables in the cable guide will be added to Step 6 in "7.5.1
Installing motherboard unit." For details, see
"Chapter 16 Maintaining Cable Kit" will be added. For details, see
Maintaining SPARC M10-1 Cable
"Storing Cables in Cable
Kit."
Guide."
"Appendix A