Problems Resolved In Versions Prior To Xcp 2043 - Fujitsu M10 Product Notes

Problems resolved in versions prior to XCP 2043

The following table lists the problems resolved in versions prior to XCP 2043.
Table 3-3
Problems resolved in versions prior to XCP 2043
SPARC
RTI No. M10-1
RTIF2-121113- x
001
RTIF2-121113- x
002
RTIF2-121113- x
006
RTIF2-121113- x
007
RTIF2-121113- x
011
SPARC SPARC
M10-4 M10-4S Description
x x After setting an invalid value
for the user name with the
setsmtp(8) command, you
execute the setemailreport(8)
command to send a test mail.
Then the reply address shows
that the mail has been
successfully sent.
x x If you execute the setaudit
delete command and use the
viewaudit(8) to display the
audit log, some audit logs may
not be deleted.
x x If you display the XSCF Web
screen in another window or in
another tab without using the
XSCF Web menu, contents may
not be normally displayed.
x x While XSCF is starting, process
down, panic or watchdog
timeout occurs, which may
cause XSCF to be reset.
x x If you execute the showsnmp(8)
command, the following
message may appear, which
means that the snmp daemon
has been terminated.
Agent Status: Disabled
Workaround
There is no effective workaround.
Even if it is displayed that the
test mail has been successfully
sent, it is not sent.
There is no effective workaround.
For operation to display the
XSCF Web screen, use the menu
tree.
Confirm that XSCF is
successfully started.
If it is not started, turn off the
power of the physical partition
(PPAR), and then disconnect the
input power supply to the
system and back on again (AC
OFF/ON).
When recycling the power
supply to the system, wait for
30 minutes or more to turn on
the input power supply after
disconnecting.
In case XSCF is not started even
if recycling the input power
supply to the system, replace
the CPU memory unit (CMU).
Execute the showsnmp(8)
command again to confirm that
the snmp daemon is restarted.
If " Agent Status:
Disabled " is still displayed,
execute the setsnmp enable
command to restart the snmp
daemon.
Chapter 3 Information on Software 27