Fujitsu M10 Product Notes page 61

Table 3-5
Problems that might occur with Oracle Solaris 10 and workarounds
SPARC
CR ID M10-1
16024646 x
SPARC SPARC
M10-4 M10-4S Description
x x If both of the following
conditions are met, the control
domain panic may occur with
" BAD TRAP: type=31 ".
The operating system of the
■
control domain is Solaris 10.
As a result of executing ldm
■
list-domain -o memory
primary, the RA (real
address) is greater than
0x200000000000 (32 TB).
Workaround
Perform the following
procedure:
1. Execute ldm list-domain -o
memory primary to display
the value of SIZE.
2. Execute ldm start-reconf
primary to enter the latency
reconfiguration mode.
3. Execute ldm remove-
memory 256M primary to
reduce the assigned memory.
4. Execute ldm set-memory
<value of SIZE in Step 1>
primary to return the
assigned memory back to the
original size.
5. Restart the Oracle Solaris of
the control domain.
6. Execute ldm list-domains -o
memory primary to confirm
that the RA is smaller than
0x200000000000.
7. Execute ldm add-spconfig
<configuration information
name> to save the
configuration information to
the XSCF.
Chapter 3 Information on Software 49