Fujitsu M10 Product Notes page 59

Table 3-4
Problems that might occur in any versions of Oracle Solaris and their workarounds (continued)
SPARC
CR ID M10-1
－ x
An error occurs in executing the scp(1), sftp(1), or ssh(1)
command of Oracle Solaris or the installation of Oracle RAC
fails (CR:15825208)
[Workaround]
Using the following procedure, change the setting so that the AES_CTR, AES_CBC_
MAC, and AES_CFB128 algorithms are not used with the assist function of the
encryption unit.
If you use it with the client function (scp(1), sftp(1), ssh(1), etc.):
■
1. Add the content of the setting in one line to a target file. A space is
Ciphers aes128-cbc,aes192-cbc,aes256-cbc,3des-bc,arcfour128,
arcfour256,arcfour,blowfish-cbc
If you use it with the server function (sshd(1M) etc.):
■
1. Add the content of the setting in one line to a target file.
SPARC SPARC
M10-4 M10-4S Description
x x When a logical domain
mounted with a 10 Gigabit
Ethernet card (SP1X7HF1F) has
the value of OpenBoot PROM
environment variable
diag-switch? being set to true,
the console shows the following
warning message and the error
log records "Msg: Device error
(FCode informed error)".
WARNING: /pci@X,
XXXXXX: FCODE mapin
doesn't match decoded
register type;
Also, executing the showstatus
(8) command may show
"Degraded" for the FRU that
mounts the relevant PCI card.
necessary only between "Cipher" and "aes128-cbc."
Target file
■
The setting of the entire system: /etc/ssh/ssh_config
The setting per user: $HOME/.ssh/ssh_config
The content of the setting
■
Target file
■
/etc/ssh/ssh_config
Workaround
Ignore all these outputs.
To prevent these outputs,
execute the following
command on the ok prompt to
change the value of OpenBoot
PROM environment variable
diag-switch? to false.
setenv diag-switch?
false
Chapter 3 Information on Software 47