NEC UNIVERGE SV9100 Manual page 107

Configuring an FTP Server
The file generated in the IP Phone Manager must be placed in an anonymous login folder. The FTP server
must be configured with an anonymous login account.
The configuration of the FTP server will vary depending of the FTP server software. Refer to the
manufactures instructions for further details.
DHCP Server Setup Windows 2003 Server
Defining Vendor Classes
1. In the DHCP server highlight the server machine on the left side. Right click on the server and
select Define Vendor Classes.
2. Click ADD.
3. Display Name = NECDT700
4. Description = auto config
5. In the same window down below there is a section that shows ID, Binary, and ASCII. Click under
ASCII.
6. Enter NECDT700. This should have also added 4E 45 43 44 54 37 30 30 under the binary section.
7. Click OK and close.
Setting Predefined Options
1. Highlight the server again. Then right click and select Set Predefined Options.
2. Change the option class to NECDT700.
3. Click ADD, and provide the following information:
Name = FTP Address
Data Type = IP address
Code = 141
4. Click OK, and start the process over again.
5. Click ADD, and provide the following information:
Name = Auto Config File Name
Data Type = String
Code = 151
6. Click ADD, and provide the following information:
Name = Auto Config File Name
Data Type = String
Code = 152
Part 2: VoIP Manual 107