NEC UNIVERGE SV9100 Manual page 236

236
System Availability
Terminal Type:
All multiline terminals
Required Components:
GPZ-IPLE
Operating Procedures
To access internal or external paging across a K-CCIS network:
1. Lift the handset or press Speaker.
2. Dial the Access Code for the required zone, or press the programmed Feature Access or One-
Touch key.
Service Conditions
General:
The single external paging zone output built into the basic B64-U20 KSU can be used for Paging
Access – (K-CCIS).
Program 31-01-02 (Paging Announcement Duration) applies to Paging Access – (K-CCIS).
If a user dials during Paging Access – (K-CCIS), DTMF tones are heard from the external paging
equipment at the remote site.
Program 31-02-01 (Internal Paging Group Number) applies to Paging Access – (K-CCIS).
Program 31-02-02 (Internal All Call Paging Receiving) applies to Paging Access – (K-CCIS).
Restrictions:
Amplifiers and speakers must be locally provided.
Combined Paging is not supported over K-CCIS.
Internal Paging across K-CCIS is supported only between UNIVERGE SV9100 and UNIVERGE
SV9100.
Related Feature List
Background Music Over External Speakers
External Zone Paging (Meet-Me)
Internal Zone Paging (Meet-Me)
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.