NEC UNIVERGE SV9100 Manual page 153

Part 2: VoIP Manual 153
4. Make announcement to the networked system.
5. Press SPK to hang up.
Park
Park places a call in a waiting state (called a Park Orbit) so that an extension user may pick it up.
Any extension user who is in the same Park Group as the extension which placed the call in Park can
answer the call.
This includes extension users in a networked system. For example, when an extension user in Park Group
3 within System A places a call in Park, the extension users in Park Group 3 at any connected system can
retrieve the call by pressing the flashing park key or dialling a service code.
If you do not want the park hold orbits to be available to other users within the network then place the
extension at each site in a different park hold group.
With a single system, when two users within the same Park Group try to place a call in the same park orbit
at the same time, one user will get the orbit while the other user's call will either ring back or it will remain
an active call, depending on how the park orbit was accessed. With AspireNet, if both users try to access
the same orbit, one user will get the orbit, while the other will hear ring back, at which time they can park
the call in a different orbit.
Operation
To Park a call in a system orbit:
You can Park Intercom or trunk calls.
1. Press Park key (SC 852: *04 + orbit).
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
3. Press SPK to hang up.
If not picked up, the call will recall to you.
OR
1. At system phone or 2-Button telephone, press HOLD.
OR
At a SLT single line telephone, hook flash.
2. Dial 831 and the Park orbit (1-64).
If you hear busy tone, the orbit is busy. Try another orbit.
3. Use Paging to announce call.
4. Press SPK to hang up.
If not picked up, the call will recall to you.
Note: The parked call recalls after the Park Hold Timer.
To pick up a parked call:
1. Lift handset.
2. Press Park key (SC 852: *04 + orbit).
OR
1. At system phone or 2-Button telephone, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 861 and the Park orbit (1-64).
Ringdown Extension, Internal/External (Hotline)
A networked system can have a phone defined as a Ringdown Extension to dial either an internal or
external number.
Operation
To place a call if your extension has ringdown programmed: