NEC UNIVERGE SV9100 Manual page 205

Calling Party Number (CPN) Presentation from Station – K-CCIS
Feature Description
Calling Party Number (CPN) Presentation from Station K-CCIS feature allows each station of the remote
systems a unique 10-digit number (the DID number of the originating station) to be sent out over the PRI
circuit of the main system.
System Availability
Terminal Type:
All Terminals
Required Components:
GPZ-IPLE
Operating Procedures
Placing a call with CPN:
Lift the handset or press Speaker.
Dial 9 + the number.
Converse with caller.
Hang up the handset.
Service Conditions
Restrictions:
A maximum of 16 digits can be assigned as the Calling Party Number (CPN) in Program 21-12-01
and Program 21-13-01.
The PRI provider must provision for the CPN used for E911. The CPN must be within the
allowable range. For more information please contact your local ISDN provider regarding
allowable ranges.
The Calling Party Number (CPN) is sent only to the network when the calling party from the remote
system dials a trunk access code of 9 when making an outbound call.
The Calling Party Number (CPN) is not sent to the network when the originating station of the
remote system calls a station in the main system that is call forwarded off site.
Related Feature List
ISDN Compatibility
Automatic Route Selection
Central Office Calls, Placing
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.
Part 2: VoIP Manual 205