NEC UNIVERGE SV9100 Manual page 71

Press 2 2 1 - Enter the IP address of the SV9100 GPZ-IPLE card Press OK.
Press Exit.
Press 4 1 - Enter 5080 (SIP Server port) Press OK.
Press Exit several times to get to the main menu.
Press Save.
The SIP MLT will now attempt to connect to the SV9100.
Registration Procedure – Automatic
When the Register Mode is set as Automatic in Easy Edit -
DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700 Logon Type. (PRG10-46-01),
information will apply.
Set the Extension Number for the SIP MLT extension against an unused (no associated hardware) port.
Easy Edit -Advanced Items/VoIP/Extensions/DT800 DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700
Logon Feature (PRG11-02)
The SIP MLT should be programmed to register to the GPZ-IPLE card on the SV9100.
Enter a Used ID and Password for each SIP MLT in Easy Edit -
DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700 Logon Password.
extension number as the User ID.
Take the Personal ID Index from the above command and enter it against the relevant extension number in
Easy Edit -Advanced Items/VoIP/Extensions/DT800 DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700
Logon Feature
If static IP addresses or external DHCP server is in use, follow these steps on the handset itself: -
Press Menu 0
User Name - ADMIN
Password - 6633222
OK
Press 1 1 - Choose DHCP on or off (depending on network requirements) Press OK.
Press 2 - IP Address of phone (if not DHCP) Type in the required IP address using * for . Press OK.
Press 3 - Default Gateway of phone if required (if not DHCP) Press OK.
Press 4 - Subnet Mask of phone (if not DHCP) Press OK.
Press Exit.
Press 2 1 1 – Enter the User ID associated with that extension programmed in the SV9100 (normally the
same as the extension number) Press OK.
Press 2 – Enter the Password associated with that extension programmed in the SV9100 Press OK.
Press Exit
Press 2 1 – Enter the IP address of the SV9100 GPZ-IPLE card Press OK.
Press Exit.
Press 4 1 - Enter 5080 (SIP Server port) Press OK.
Press Exit several times to get to the main menu.
Press Save.
The SIP MLT will now attempt to connect to the SV9100.
Part 2: VoIP Manual
Advanced Items/VoIP/Extensions/DT800
Advanced Items/VoIP/Extensions/DT800
It is recommended to use the
71
the following