NEC UNIVERGE SV9100 Manual page 63

Part 2: VoIP Manual 63
The 8 free VoIP channels are available on this SV9100.
The below table illustrates the number of VoIP channels that are allocated in licensing with each IP
device. These would be visible in the Feature Activation screen when licenses are installed as VoIP
Channels (5103).
IP Devices Licensing
Note: K-CCIS and Aspirenet Feature Netw orking use the sam e VoIP channels allocated
When SV9100 licenses are installed the VoIP channels must be assigned to the GCD-CP10 for a
stand alone system and also when Netlink is configured for the Primary and Secondary nodes,
otherwise if the free license is not enabled then the GPZ-IPE will be restricted to only use the 8 free
VoIP channels and most likely cause speech issues and instanses of the DSP Busy Alarm being
reported.
The VoIP channels can be allocated using
Easy Edit – Advanced Items/VoIP/General Settings/VoIP
Configuration/Blade License Setup (PRG 10-54)