NEC UNIVERGE SV9100 Manual page 170

170
10-68-01
10-68-02
10-68-03
14-18-05
84-26-01
SIP Register ID
32 Register ID's can be programmed on each NetLink system that has SIP Trunks configured.
Register ID 0 to 31 uses the User ID's programmed in PRG10-36.
Trunks
SIP Register ID's for trunks can only be applied to trunks that belong to the same system as the Register
ID.
Stations
SIP Register ID's for Stations will only be applied when dialling out on a trunk from the Primary system. If a
station dials out using a trunk on a Secondary system the Station Register ID is not applied.
Alarms
SIP Trunk problems can be indicated on the PC Pro alarm report and on the display of a handset (if
configured).
The information below details the alarms from the DIM (alminfo), PC Pro will also show similar
information:
The information below details the alarms shown on a display telephone (this may differ slightly depending
on the size of the display):
Register Time Out Error
NetLink ###:SIP(XX) REG REQ
Disabled TIMEOUT
NetLink ###:SIP(XX) REG TIMEOUT -%
Enabled %
SIP
1
4
Profile 1
172.16.0.20
Format
###:Alarm number(60)
XX:Register ID(1-32)
%%:System ID(1-16)
10-68-01
10-68-02
10-68-03
14-18-05
84-26-01
Key Terminal LCD Example
"60:SIP(05) REG REQ
TIMEOUT "
"60:SIP(05) REG TIMEOUT -02 "
SIP
4
4
Profile 1
172.16.1.20