NEC UNIVERGE SV9100 Manual page 196

196
Required Components:
GPZ-IPLE
Operating Procedures
To set Call Forward – Busy/No Answer – K-CCIS from a Multiline Telephone (Closed Numbering Plan):
1. Press the Call Forward – Busy/No Answer ON/OFF key.
2. Dial 1 to set.
3. Dial the remote K-CCIS station number.
4. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 844 (default), then 1 to set.
3. Dial the remote K-CCIS station number.
4. Restore handset or press Speaker.
To set Call Forward – Busy/No Answer - K-CCIS from a Multiline Telephone (Open Numbering Plan):
1. Press the Call Forward – Busy/No Answer ON/OFF key.
2. Dial 1 to set
3. Dial the trunk Access Code.
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 844 (default), then Dial 1 to set.
3. Dial the trunk Access Code.
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
To cancel Call Forward – Busy/No Answer – K-CCIS from a Multiline Telephone:
1. Press Call Forward – Busy/No Answer On/Off key.
2. Dial 0 to cancel.
3. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 844 (default), then Dial 0 to cancel.
3. Restore handset or press Speaker.
Service Conditions
General:
Any station or Call Arrival (CAR) key can be set for Call Forwarding – Busy/No Answer – K-CCIS.
Restrictions:
Call Forward – Off-Premise must be allowed in Class of Service (PRG 20-11-12) External Call
forward to set call forwarding to a remote K-CCIS station number.
Trunk-to-Trunk Transfer must be allowed in PRG 14-01-13 for each trunk (Trunk-to-Trunk Transfer
Yes/No Selection).
A Single Line Telephone user can transfer a trunk call to another internal station that is set for Call
Forwarding – All Calls - K-CCIS, however, when the distant party answers the call, a conference
cannot be established.
The destination station in the distant systems is the only station that can call a station with Call
Forwarding – All Calls – K-CCIS set.
Call Forwarding with Both Ringing (All Calls) is not supported.